HD6400K
8K HDMI™ over HDBaseT Extender, up to 150 m
No matching section found for .
8K HDMI™ over HDBaseT Extension
HD6400K is a high-performance, long-reach HDBaseT extender designed for HDMI, RS-232 and IR signal transmission over a single twisted-pair copper cable. The transmitter converts the HDMI and control signals into HDBaseT for long-distance delivery, while the receiver restores them to the original HDMI and control interfaces at the display end.
The system supports transmission distances of up to 90 m / 295 ft for 8K@30Hz 4:4:4 and 4K@120Hz 4:4:4, 120 m / 394 ft for 4K@60Hz 4:4:4, and 150 m / 492 ft for 1080p over CAT6 cable.
For best reliability, use a direct-interconnection network cable layout. Do not use a crossover cable. A surge protection system is also recommended to protect the extender and connected equipment.
Performance Highlights
- HDCP
- HDCP 2.3 compliant.
- Bandwidth
- Video bandwidth up to 40Gbps FRL and 18Gbps TMDS.
- Resolution
- Supports industry-standard video resolutions from VGA-WUXGA and 480i up to 8K30.
- HDMI re-clocking
- The receiver provides HDMI re-clocking to help resolve HDMI compatibility, HDCP and handshaking issues.
- HDMI audio
- Supports LPCM 2.0 / 5.1 / 7.1, Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.
- Control pass-through
- Bi-directional IR, RS-232 and CEC pass-through.
- Gaming video features
- Supports VRR, FVA and ALLM.
- HDR
- HDR10, HDR10+, Dolby Vision and HLG pass-through.
- Audio de-embedding
- Both transmitter and receiver support analog audio de-embedding.
- Power
- Bi-directional PoC allows either the transmitter or receiver to power the opposite end through the cable.
Included Accessories
| Item | Quantity |
|---|---|
| 8K HDMI over HDBaseT Extender Transmitter | 1 |
| 8K HDMI over HDBaseT Extender Receiver | 1 |
| IR Blaster Cable, 1.5 m | 1 |
| IR Wideband Receiver Cable, 1.5 m | 1 |
| 3-pin 3.5 mm Phoenix Connector | 4 |
| 24V / 1A Locking Power Supply | 1 |
| Mounting Ear | 4 |
| Machine Screw, KM3×4 | 8 |
| User Manual | 1 |
Video & Audio
- HDMI compliance
- HDMI 2.1
- HDCP compliance
- HDCP 2.3
- Video bandwidth
- 40Gbps FRL and 18Gbps TMDS
- Video resolution
- Up to 8K@30Hz 4:4:4. Also supports standard PC and HDTV resolutions from 640×480p60 to 7680×4320p30.
- Color depth
- 8 / 10 / 12-bit
- Color space
- RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
- HDR
- HDR, HDR10, HDR10+, Dolby Vision, HLG
- HDMI audio format
- LPCM 2.0 / 5.1 / 7.1 up to 192 kHz, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS Surround, DTS 96/24, DTS-ES, DTS Express, DTS-HD HRA, DTS-HD Master Audio and DTS:X.
Transmission Distance
| Signal Format | Maximum Distance over CAT6 |
|---|---|
| 8K@30Hz 4:4:4 / 4K@120Hz 4:4:4 | 90 m / 295 ft |
| 4K@60Hz 4:4:4 | 120 m / 394 ft |
| 1080p | 150 m / 492 ft |
Connections
- Transmitter input
- 1× HDMI IN, HDMI Type A 19-pin female
- Transmitter output
- 1× HDBT OUT, RJ45 8-pin female
- Receiver input
- 1× HDBT IN, RJ45 8-pin female
- Receiver output
- 1× HDMI OUT, HDMI Type A 19-pin female
- Control ports
- IR IN, IR OUT, RS-232 3-pin phoenix connector and USB Type-C SERVICE port on both units.
Mechanical & Environmental
- Dimensions
- Transmitter / Receiver: 140 mm (W) × 65 mm (D) × 18 mm (H)
- Weight
- Transmitter / Receiver: 240 g
- Housing
- Metal enclosure, black
- Power supply
- DC 24V / 1A, with bi-directional PoC support
- Power consumption
- Transmitter: 11.28 W; Receiver: 10.8 W
- Operating temperature
- 0°C to 40°C / 32°F to 104°F
- Storage temperature
- -20°C to 60°C / -4°F to 140°F
- Humidity
- Operating: 20%–80% RH, non-condensing; Storage: 10%–90% RH, non-condensing
- ESD protection
- IEC 61000-4-2: ±8kV air-gap discharge and ±4kV contact discharge
Panel Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | Green LED is on when the transmitter is powered on. |
| 2 | EDID DIP Switch | Used for EDID setting. See the EDID table below. |
| 3 | SERVICE | USB-C port for serial debugging and firmware update. |
| 4 | DC 24V | 24V / 1A power input. With PoC, either transmitter or receiver can power the opposite end. |
| 5 | HDBT OUT | Connects to receiver HDBT IN via CAT6 cable. |
| 6 | Link Signal Indicator | Green LED on: transmitter and receiver are connected and linked. Off: not linked. |
| 7 | Data Signal Indicator | Yellow LED on: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Off: no HDMI signal. |
| 8 | AUDIO OUT (L/R) | Analog unbalanced audio output, up to 1Vrms. Wiring: L+, ground, R+. |
| 9 | HDMI IN | HDMI input port for source device connection. |
| 10 | IR IN | Connects to IR receiver cable. The IR signal is emitted from receiver IR OUT. |
| 11 | IR OUT | Connects to IR blaster cable. The IR signal comes from receiver IR IN. |
| 12 | RS-232 | 3-pin phoenix connector for RS-232 command transmission to a PC or control system. |
Panel Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | Green LED is on when the receiver is powered on. |
| 2 | SERVICE | USB-C port for serial debugging and firmware update. |
| 3 | DC 24V | 24V / 1A power input. With PoC, either transmitter or receiver can power the opposite end. |
| 4 | HDBT IN | Connects to transmitter HDBT OUT via CAT6 cable. |
| 5 | Link Signal Indicator | Green LED on: transmitter and receiver are connected and linked. Off: not linked. |
| 6 | Data Signal Indicator | Yellow LED on: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Off: no HDMI signal. |
| 7 | AUDIO OUT (L/R) | Analog unbalanced audio output, up to 1Vrms. Wiring: L+, ground, R+. |
| 8 | HDMI OUT | HDMI output port for connection to a TV, monitor or projector. |
| 9 | IR IN | Connects to IR receiver cable. The IR signal is emitted from transmitter IR OUT. |
| 10 | IR OUT | Connects to IR blaster cable. The IR signal comes from transmitter IR IN. |
| 11 | RS-232 | 3-pin phoenix connector for RS-232 command transmission to a PC or control system. |
EDID Setting List
| DIP | EDID Mode |
|---|---|
| 1111 | Copy RX HDMI OUT port sink EDID |
| 1110 | 8K30 4:4:4 HDR, 7.0CH |
| 1101 | 8K30 4:4:4 HDR, 2.0CH |
| 1100 | 4K120 4:4:4 HDR, 7.1CH |
| 1011 | 4K120 4:4:4 HDR, 2.0CH |
| 1010 | 4K120 4:2:0 HDR, 7.1CH |
| 1001 | 4K120 4:2:0 HDR, 2.0CH |
| 1000 | 5K60 4:4:4 HDR, 7.1CH |
| 0111 | 5K60 4:4:4 HDR, 2.0CH |
| 0110 | 4K60 4:4:4 HDR, 7.1CH |
| 0101 | 4K60 4:4:4 HDR, 2.0CH |
| 0100 | 4K30 4:4:4 HDR, 7.1CH |
| 0011 | 4K30 4:4:4 HDR, 2.0CH |
| 0010 | 1920×1200 SDR, 2.0CH |
| 0001 | 1080p60 SDR, 7.1CH |
| 0000 | 1080p60 SDR, 2.0CH |
When compatibility issues occur, start with 1111 to copy the display EDID, then select a fixed EDID mode if the source requires a stable preset.
IR Receiver and Blaster Wiring
| Cable | Pin 1 | Pin 2 | Pin 3 |
|---|---|---|---|
| IR Blaster | IR Blaster Signal | Power | NC |
| IR Receiver | IR Signal | Power | Grounding |
Recommended IR Operating Distance
- ±45° angle
- 0 to 5 m remote-control transmission distance.
- ±90° angle
- 0 to 8 m remote-control transmission distance.
Basic Connection Procedure
- Connect the HDMI source device, such as a PC or media player, to the transmitter HDMI IN port.
- Connect the transmitter HDBT OUT to the receiver HDBT IN using a straight-through CAT6 cable.
- Connect the receiver HDMI OUT to the display device, such as an UHDTV, monitor or projector.
- Connect IR receiver and IR blaster cables if remote-control pass-through is required.
- Connect RS-232 phoenix terminals to a PC or control system when serial control pass-through is required.
- Connect analog speakers to AUDIO OUT if HDMI audio de-embedding is required.
- Connect the 24V / 1A power supply to either the transmitter or the receiver. The opposite side can be powered through PoC.
Network Cable Requirement
- Cable type
- Use CAT6 copper cable for the stated transmission distances.
- Wiring method
- Use direct interconnection / straight-through wiring. Do not cross connect.
- Recommended protection
- Use surge protection in environments exposed to electrical spikes, surges, electrostatic discharge or lightning strikes.
ExampleTransmitter: power supply, HDMI source, IR receiver, speakers and RS-232 control system.
ExampleReceiver: display, IR blaster, speakers and RS-232 target/control equipment.
The HDMI name, HDMI High-Definition Multimedia Interface and HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
HD6400K
8K HDMI™ over HDBaseT Extender, up to 150 m
No matching section found for .
8K HDMI™ over HDBaseT Extension
HD6400K is a high-performance, long-reach HDBaseT extender designed for HDMI, RS-232 and IR signal transmission over a single twisted-pair copper cable. The transmitter converts the HDMI and control signals into HDBaseT for long-distance delivery, while the receiver restores them to the original HDMI and control interfaces at the display end.
The system supports transmission distances of up to 90 m / 295 ft for 8K@30Hz 4:4:4 and 4K@120Hz 4:4:4, 120 m / 394 ft for 4K@60Hz 4:4:4, and 150 m / 492 ft for 1080p over CAT6 cable.
For best reliability, use a direct-interconnection network cable layout. Do not use a crossover cable. A surge protection system is also recommended to protect the extender and connected equipment.
Performance Highlights
- HDCP
- HDCP 2.3 compliant.
- Bandwidth
- Video bandwidth up to 40Gbps FRL and 18Gbps TMDS.
- Resolution
- Supports industry-standard video resolutions from VGA-WUXGA and 480i up to 8K30.
- HDMI re-clocking
- The receiver provides HDMI re-clocking to help resolve HDMI compatibility, HDCP and handshaking issues.
- HDMI audio
- Supports LPCM 2.0 / 5.1 / 7.1, Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.
- Control pass-through
- Bi-directional IR, RS-232 and CEC pass-through.
- Gaming video features
- Supports VRR, FVA and ALLM.
- HDR
- HDR10, HDR10+, Dolby Vision and HLG pass-through.
- Audio de-embedding
- Both transmitter and receiver support analog audio de-embedding.
- Power
- Bi-directional PoC allows either the transmitter or receiver to power the opposite end through the cable.
Included Accessories
| Item | Quantity |
|---|---|
| 8K HDMI over HDBaseT Extender Transmitter | 1 |
| 8K HDMI over HDBaseT Extender Receiver | 1 |
| IR Blaster Cable, 1.5 m | 1 |
| IR Wideband Receiver Cable, 1.5 m | 1 |
| 3-pin 3.5 mm Phoenix Connector | 4 |
| 24V / 1A Locking Power Supply | 1 |
| Mounting Ear | 4 |
| Machine Screw, KM3×4 | 8 |
| User Manual | 1 |
Video & Audio
- HDMI compliance
- HDMI 2.1
- HDCP compliance
- HDCP 2.3
- Video bandwidth
- 40Gbps FRL and 18Gbps TMDS
- Video resolution
- Up to 8K@30Hz 4:4:4. Also supports standard PC and HDTV resolutions from 640×480p60 to 7680×4320p30.
- Color depth
- 8 / 10 / 12-bit
- Color space
- RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
- HDR
- HDR, HDR10, HDR10+, Dolby Vision, HLG
- HDMI audio format
- LPCM 2.0 / 5.1 / 7.1 up to 192 kHz, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS Surround, DTS 96/24, DTS-ES, DTS Express, DTS-HD HRA, DTS-HD Master Audio and DTS:X.
Transmission Distance
| Signal Format | Maximum Distance over CAT6 |
|---|---|
| 8K@30Hz 4:4:4 / 4K@120Hz 4:4:4 | 90 m / 295 ft |
| 4K@60Hz 4:4:4 | 120 m / 394 ft |
| 1080p | 150 m / 492 ft |
Connections
- Transmitter input
- 1× HDMI IN, HDMI Type A 19-pin female
- Transmitter output
- 1× HDBT OUT, RJ45 8-pin female
- Receiver input
- 1× HDBT IN, RJ45 8-pin female
- Receiver output
- 1× HDMI OUT, HDMI Type A 19-pin female
- Control ports
- IR IN, IR OUT, RS-232 3-pin phoenix connector and USB Type-C SERVICE port on both units.
Mechanical & Environmental
- Dimensions
- Transmitter / Receiver: 140 mm (W) × 65 mm (D) × 18 mm (H)
- Weight
- Transmitter / Receiver: 240 g
- Housing
- Metal enclosure, black
- Power supply
- DC 24V / 1A, with bi-directional PoC support
- Power consumption
- Transmitter: 11.28 W; Receiver: 10.8 W
- Operating temperature
- 0°C to 40°C / 32°F to 104°F
- Storage temperature
- -20°C to 60°C / -4°F to 140°F
- Humidity
- Operating: 20%–80% RH, non-condensing; Storage: 10%–90% RH, non-condensing
- ESD protection
- IEC 61000-4-2: ±8kV air-gap discharge and ±4kV contact discharge
Panel Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | Green LED is on when the transmitter is powered on. |
| 2 | EDID DIP Switch | Used for EDID setting. See the EDID table below. |
| 3 | SERVICE | USB-C port for serial debugging and firmware update. |
| 4 | DC 24V | 24V / 1A power input. With PoC, either transmitter or receiver can power the opposite end. |
| 5 | HDBT OUT | Connects to receiver HDBT IN via CAT6 cable. |
| 6 | Link Signal Indicator | Green LED on: transmitter and receiver are connected and linked. Off: not linked. |
| 7 | Data Signal Indicator | Yellow LED on: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Off: no HDMI signal. |
| 8 | AUDIO OUT (L/R) | Analog unbalanced audio output, up to 1Vrms. Wiring: L+, ground, R+. |
| 9 | HDMI IN | HDMI input port for source device connection. |
| 10 | IR IN | Connects to IR receiver cable. The IR signal is emitted from receiver IR OUT. |
| 11 | IR OUT | Connects to IR blaster cable. The IR signal comes from receiver IR IN. |
| 12 | RS-232 | 3-pin phoenix connector for RS-232 command transmission to a PC or control system. |
Panel Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | Green LED is on when the receiver is powered on. |
| 2 | SERVICE | USB-C port for serial debugging and firmware update. |
| 3 | DC 24V | 24V / 1A power input. With PoC, either transmitter or receiver can power the opposite end. |
| 4 | HDBT IN | Connects to transmitter HDBT OUT via CAT6 cable. |
| 5 | Link Signal Indicator | Green LED on: transmitter and receiver are connected and linked. Off: not linked. |
| 6 | Data Signal Indicator | Yellow LED on: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Off: no HDMI signal. |
| 7 | AUDIO OUT (L/R) | Analog unbalanced audio output, up to 1Vrms. Wiring: L+, ground, R+. |
| 8 | HDMI OUT | HDMI output port for connection to a TV, monitor or projector. |
| 9 | IR IN | Connects to IR receiver cable. The IR signal is emitted from transmitter IR OUT. |
| 10 | IR OUT | Connects to IR blaster cable. The IR signal comes from transmitter IR IN. |
| 11 | RS-232 | 3-pin phoenix connector for RS-232 command transmission to a PC or control system. |
EDID Setting List
| DIP | EDID Mode |
|---|---|
| 1111 | Copy RX HDMI OUT port sink EDID |
| 1110 | 8K30 4:4:4 HDR, 7.0CH |
| 1101 | 8K30 4:4:4 HDR, 2.0CH |
| 1100 | 4K120 4:4:4 HDR, 7.1CH |
| 1011 | 4K120 4:4:4 HDR, 2.0CH |
| 1010 | 4K120 4:2:0 HDR, 7.1CH |
| 1001 | 4K120 4:2:0 HDR, 2.0CH |
| 1000 | 5K60 4:4:4 HDR, 7.1CH |
| 0111 | 5K60 4:4:4 HDR, 2.0CH |
| 0110 | 4K60 4:4:4 HDR, 7.1CH |
| 0101 | 4K60 4:4:4 HDR, 2.0CH |
| 0100 | 4K30 4:4:4 HDR, 7.1CH |
| 0011 | 4K30 4:4:4 HDR, 2.0CH |
| 0010 | 1920×1200 SDR, 2.0CH |
| 0001 | 1080p60 SDR, 7.1CH |
| 0000 | 1080p60 SDR, 2.0CH |
When compatibility issues occur, start with 1111 to copy the display EDID, then select a fixed EDID mode if the source requires a stable preset.
IR Receiver and Blaster Wiring
| Cable | Pin 1 | Pin 2 | Pin 3 |
|---|---|---|---|
| IR Blaster | IR Blaster Signal | Power | NC |
| IR Receiver | IR Signal | Power | Grounding |
Recommended IR Operating Distance
- ±45° angle
- 0 to 5 m remote-control transmission distance.
- ±90° angle
- 0 to 8 m remote-control transmission distance.
Basic Connection Procedure
- Connect the HDMI source device, such as a PC or media player, to the transmitter HDMI IN port.
- Connect the transmitter HDBT OUT to the receiver HDBT IN using a straight-through CAT6 cable.
- Connect the receiver HDMI OUT to the display device, such as an UHDTV, monitor or projector.
- Connect IR receiver and IR blaster cables if remote-control pass-through is required.
- Connect RS-232 phoenix terminals to a PC or control system when serial control pass-through is required.
- Connect analog speakers to AUDIO OUT if HDMI audio de-embedding is required.
- Connect the 24V / 1A power supply to either the transmitter or the receiver. The opposite side can be powered through PoC.
Network Cable Requirement
- Cable type
- Use CAT6 copper cable for the stated transmission distances.
- Wiring method
- Use direct interconnection / straight-through wiring. Do not cross connect.
- Recommended protection
- Use surge protection in environments exposed to electrical spikes, surges, electrostatic discharge or lightning strikes.
ExampleTransmitter: power supply, HDMI source, IR receiver, speakers and RS-232 control system.
ExampleReceiver: display, IR blaster, speakers and RS-232 target/control equipment.
The HDMI name, HDMI High-Definition Multimedia Interface and HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.